RG Gundam Freedom Model Kit 1:144

RG Gundam Freedom Model Kit 1:144

 - Sword bearing the name of `freedom`Rishi to RG - Freedom Gundam finally here!
- [Gundam SEED] than the RG Freedom Gundam comes a lead aircraft. Actual negotiations Based on repeatability of wing shape and moving with a new frame has been pursuing a strict realism.
- MA-M20 Lupus medium-range beam rifle shooting ... special weapons Freedom Gundam.
Add stock and allow to shield and attached.
- Rakeruta saber saber ... reproduce the `beam 'in clear plastic portion. The two In addition to gimmicks to be bound, can be attached to the waist.
- Hi Matt ... Wing is equipped with a gimmick mode deployment, the actual shape is overlaid investigation Good design. `` High Mach mode can reproduce a high-mobility form of air combat wing deployed.
- Anti-laminated beam shield can be mounted on the arm .... Mounting base can slide up and down So, the degree of freedom of mounting position, the backside of the cartridge details such as energy Rich in detail.
- Full Burst Mode. Thrale sphere with the clock mounted on both sides of the gun waist, wing Convergent beam plasma cannon expandable Baraena that joint.
- RG Freedom Gundam is composed of nine runners. Boasts unparalleled ease of assembly Advanced internal frame joints de MS, and detailed consideration to the actual armor division, If RG is in the `Gundam` s.
- Accessories: Rakeruta saber × 2, anti-laminated beam shield Lupus beam rifle, look in the wrist (left), with rifle wrist (right)

Ultra-Act Evil Tiga Action Figure

MG Gundam Sandrock EW Model Kit 1:100

 - [Gundam Ace Monthly] comic magazine during deployment? Sandrock EW, 現Ru to MG!
- Adopted by MG Gundam W series adopt XXXG frame!
- Adopt new design drew his cause Katokihajime!
- He caused Katokihajime draw markings.
- Retrofit heat shield at the show hotel, can reproduce the cross-crusher!
- The cockpit hatch is open the chest inside to recreate the cockpit!
- With a new gimmick to the claw portion of the shield! The shield of his cause Katoki draw the If you add in the MG stretch the interpretation of a gimmick.
- Reproduce the back thrusters. The included beam machine gun can be mounted on the back.
- Best weapon can reproduce the cross-Sand Rock Crusher!
- Combine the two bright show heat can also be a single weapon.
- Tell a cross-section shows Heat Crusher is left open to work.
- Included beam machine gun!
- Movable beam machine gun in stock and grip, can be transformed into storage forms.
- Accessories: shield, Huixiang × 2 Heat a large beam machine gun

figma Robocop Action Figure

MG Kamen Rider Original No.1 Model Kit

MG Kamen Rider Original No.1 Model Kit

 - The origin of the series - Rider No. 1, finally appeared in the MGF!

- This year, also said the origin of the Masked Rider celebrated its 40th anniversary, in its initial design FIGURE-I RISE! New modeling and design every detail the differences between the new No. 1 ahead of the release. In the MGF can be reproduced if a large force riders Kick Stand and range of motion!

- To faithfully reproduce the difference between the new No. 1! ... Reproduce the differences in the new No. 1 and antenna, with no initial mold Gloves, masks are completely new modeling, protruding reluctance reproduced, realistic riders belt The initial boot of the mold-free, comes with muffler for action, fixing accessories scarf.

- Masked Rider's fight for freedom and human Shocker!

- No. 1 ... No. 1 Masked Rider, the Rider] since the 14th story of a leading role Rider No. 2 to the baton. And depart the overseas when it re-appeared after the original return Have different design details, such as masks. Differentiation also its No. 1 earlier versions of Sometimes referred to as 'Old No. 1'.

- Accessories: equality (right), flat hand (left), fixing muffler, muffler for action, pedestal

Robot Spirits Side MS Tallgeese III Action Figure

 

http://www.toytoyclub.com/index.php?main_page=product_info&cPath=1_114_42&products_id=2928

MG Gundam 00 Gundam Seven Sword/G Model Kit

 

http://www.toytoyclub.com/index.php?main_page=product_info&cPath=1_113_5&products_id=2975

- What version of the MG Double O Seven Swords appeared OOV Gaiden Wing! - Senki Gundam Gundam OOV] Seven Swords or the MG / G more!
- Seven Swords comes with all weapons!
- For each weapon packed gimmick!
- Part Seven Swords knee unique new parts!
- Seven Swords + GN Sword II comes with blaster!
- Use clear plastic, to reproduce the GN Sword II blaster packed with gimmicks? Fixed joints for the arms Installed. Expandable grip. Binder can be attached to the joint part.
- Shield and Sword mode mode of GN Buster Sword II can be reproduced in conjunction!
- LED unit (sold separately) in emission?
- Also packed GN Sword II Long & Short gimmick!
- GN Qatar joint parts can be connected with?
- Accessories: GN Sword II blaster, GN Buster Sword II, GN Sword II Short, GN Sword II Long GN Qatar × 2, GN beam saber × 2,1 / 100 pilot figure (standing sitting)
( This is a machine translation. Please allow for possible misinterpretations in the text. )

Saint Cloth Myth EX Aries Mu Action Figure

Saint Cloth Myth EX Aries Mu Action Figure

Gundam HG RGM-86R GM III Model Kit 1:144

Gundam HG RGM-86R GM III Model Kit 1:144

- Mobile Suit Gundam ZZ III gym than can do it! HGUC Jim III, the latest form of reproduction!
- Supplied missile capable purge
Shoulder: Nomarumisairupoddo ... opening the hatch in the replacement reproduction.
Waist: Large high ... can reproduce the form of missile injection to remove the cap.
- Will be compatible with the armed Pureibaryu UP! Parts compatible with UC III gym an episode of the second Custom machines can be replicated?
- Also included large variety of hand parts. PS also supports the adoption paint.
- Jim III is ... Mobile Suit Gundam ZZ], theatrical [Mobile Suit Gundam: Char's Counterattack] to Production model of the Earth Federation Army appeared MS. The latest [Gundam UC] also appeared in episode 2.
- Accessories: beam saber, shield, beam rifle, Nomarumisairupoddo × 2, Large high performance missile × 2, fist (left), Hirate (left), for the rifle grip (right) For saber grip (left)

Saint Cloth Myth EX Leo Aioria Action Figure

 

Hot toys Captain America The First Avenger Action Figure

Hot toys Captain America The First Avenger Action Figure

Hot Toys is proud to present the collectible figure of the great superhero from the Marvel Studios - the 1/6th scale Captain America Limited Edition Collectible Figurine from the upcoming summer blockbuster Captain America: The First Avenger movie. The movie-accurate collectible is specially crafted based on the image of Chris Evans as Captain America in his hero costume in the movie, highlighting the newly developed head sculpt, highly detailed costume and weapons.
The 1/6th scale Captain America Limited Edition Collectible Figurine specially features:
- Authentic and detailed fully realized likeness of Chris Evans as Captain America in his hero costume in the Captain America: The First Avenger movie
- Approximately 30 cm tall
- Helmeted head
- Muscular body with over 30 points of articulations
- Movie-accurate facial expression with detailed wrinkles and skin texture
- Nine (9) pieces of interchangeable gloved palms including:
- One (1) pair of palms for holding shield
- One (1) pair of palms for wielding shield
- One (1) right palm for holding gun
- One (1) pair of relaxed palms
- One (1) pair of fists
- Each piece of head sculpt is specially hand-painted
Costume:
- One (1) blue and grayish-white jacket with embossed pattern as well as stars in chest and arms
- One (1) pair of grey and red suspenders
- One (1) pair of blue pants
- One (1) brown leather-like belt with pouches and pistol sheath
- One (1) pair of brown boots
Weapons:
- One (1) metal-like electroplated shield
- One (1) machine gun
- One (1) pistol
Accessory:
- Figure stand with Captain America nameplate and the movie logo

MG Gundam MSN-001A1 Delta Plus Model Kit

 - Completely transformed! Korezo MG! Delta Plus system variable machine MG expression appeared in one hundred!
- Fully realized deformation mechanism based on careful modeling!
- Getting out of form during deformation is also equipped with a locking mechanism.
- Shield of armed gimmick of storage.
- MS provided by Dr. Hajime Katoki Makingusutekka designer.
- The scale of the figures provided.
- Accessories: Beam Rifle, shield dedicated beam saber × 2 (housed in the shield) Grenade × 2, only joint action based, the scale figure Audrey Liddy, Kokupittofigyua

Hot toys Masterpiece Spider-Man 3 New Goblin Action Figure

Hot toys Masterpiece Spider-Man 3 New Goblin Action Figure
The 1/6th scale New Goblin Limited Edition Collectible Figurine specially features:
- Authentic and detailed fully realized likeness of James Franco as New Goblin in the Spider-Man 3 movie
- Real-like facial expression with details wrinkles and gesture
- Alternate head with green mask and protective eye glasses
- Approximately 30 cm tall
- TrueType body with 30 points of articulation
- Two (2) pairs of interchangeable gloved palms including:
■ One (1) pair of relaxed palms with right palm for holding sword and left palm for holding pumpkin bomb
■ One (1) pair of fists
- Each piece of head sculpt is specially hand-painted

Costume :
- One (1) black- and green-colored jacket with elbow pads, belt and sword sheath on the back
- One (1) pair of black pants
- One (1) pair of black snowboots

Weapons:
- Three (3) swords with different lengths
- One (1) set of pumpkin bomb
- One (1) pair of forearm armor weapon (right side can be interchanged to fighting mode)

Accessories:
- One (1) sword pocket with straps
- One (1) sword sheath
- One (1) sky stick with light-up function and transparent stand
- Figurine stand with New Goblin nameplate and the movie logo

Hot toys Masterpiece Superman Action Figure

Hot toys Masterpiece Superman Action Figure
Amid high anticipation, Hot Toys is proud to present the 1/6th scale Superman Collectible Figure from the classic superhero movie Superman in 1978.
A brave and kind-hearted hero with a strong sense of justice, morality and righteousness. An American cultural icon, a fictional personality and a movie character.
Amid high anticipation, Hot Toys is proud to present the 1/6th scale Superman Collectible Figure from the classic superhero movie Superman in 1978. The movie-accurate Superman collectible is specially crafted based on the image of Christopher Reeve in the movie, highlighting the authentic head sculpt, movie-accurate costume and detailed figure stage imitating the Fortress of Solitude. The 1/6th scale Superman Collectible Figure specially features:
-Authentic and detailed fully realized likeness of Christopher Reeve as Superman in the Superman movie
-Real-like facial expression with detailed wrinkles and gesture
-Detailed hair sculpture
-Approximately 30 cm tall
-Newly sculpted muscular body with over 30 points of articulation with extra forceful upper body as in neck and chest
-Three (3) pairs of interchangeable palms including:
-One (1) pair of relaxed palms
-One (1) pair of fists
-One (1) pair of palms for fighting
-Each piece of head sculpt is specially hand-painted
Costume :
-One (1) set of costume in Superman style including one-piece blue costume with Superman logo in chest, yellow belt, red triangular-shaped pants and red cape
-One (1) pair of red boots

Accessories: -Specially-made figure stage imitating the Fortress of Solitude
-Figure stand with Superman nameplate and the movie logo

figma Kamen Rider Wrath Action Figure

figma Kamen Rider Wrath Action Figure
- Together, we `ll be stronger ... Takeshi Hide deprived [Las Rider] race?
- Was made in the USA [Masked Rider], your a proud soldier Ben cod body awareness and controlled by the evil invaders Zeibiakkusu [Las Rider] of the figma!
- Figma, smooth and determined Kichitsu joint parts and original, reproduce every scene in the play.
- New construction material widely used in soft body, further distorting the proportions range of motion and secure!
- You can enjoy intense action poses Raidarashii mask.
- Shield machines, and block all types summoned cane, came to juggling twin swords in the movie.
- Rasurashii with overwhelming power, it poses can be reproduced with pomp and circumstance.
- To have a card and wrist, all 10 came to hand parts.
- With a movable brace that allows various scenes Stand figma shipped.

figma Kamen Rider Onyx Action Figure

figma Kamen Rider Onyx Action Figure
- Together, we `ll be stronger ... the New Power! [Raidaonikisu mask] race?
- Was made in the USA [Masked Rider] when I got her another stolen card deck kits [Raidaonikisu mask] of the figma!
- Figma, smooth and determined Kichitsu joint parts and original, reproduce every scene in the play.
- New construction material widely used in soft body, further distorting the proportions range of motion and secure!
- You can enjoy intense action poses Raidarashii mask.
- Looks like the kind of weapons can be equipped with jet-black with a sword and shield is very similar to Dragon Knight.
- Please present a united front to recreate the final battle with the Dragon Knight played by Adam.
- To have a card and wrist, all 10 came to hand parts.
- With a movable brace that allows various scenes Stand figma shipped.

12 inch Saint Cloth Crown Sagittarius Seiya Action Figure

12 inch Saint Cloth Crown Sagittarius Seiya Action Figure

Saint Cloth Myth EX Gemini Saga Action Figure

Saint Cloth Myth EX Gemini Saga Action Figure

HG Gundam Dreissen (Unicorn Ver.) Model Kit 1:144

HG Gundam Dreissen (Unicorn Ver.) Model Kit 1:144
- Dry Suit Gundam UC Center edition of HGUC finally!
- UC, of course, ZZ was at arms also included! UC Gundam comes armed with a bazooka and the heat was at saber. ZZ appeared in more Tomahawk beam, the beam is attached Lancer. The beam section is a clear reproduction.
- Beam Gatling reproduced! Gatling reproduction is characteristic of the sensor inside the drive sleeve. The slide mechanism is also reproduced by the replacement cover.
- Reproduce Toraiburedo! The back is equipped with three armed Toraiburedo center dedicated dry. Stored state, each state included three deployments.
- Accessories: bazooka, heat saber, beam tomahawk, beam Lancer, fist (right) Have the manual grip (left), Toraiburedo (Stuffed expanded state) × 3 each

MG Gundam Epyon EW Model Kit

MG Gundam Epyon EW Model Kit
- A new era next aircraft (Epion) is needed] The new design version Gandamuepion EW sorties!
- Complete Transformation (MS form, flight form)
- [Ssangyong] with a gimmick to give expression to a variety!
- A movable neck and neck ... the movable part in bringing out the consolidation of four places.
- Opening and closing the mouth opening and closing gimmick ... with a sole portion of the mouth and Ssangyong.
- A new interpretation of the nail nails ... withdraw from parts of the forearm, moving.
- Withdrawal mechanism] provides a sense of movement in production.
- The Hitoroddo [bending] can reproduce the Deshinari gimmick ... bringing out the joint parts.
- Interlocking movable wings ... gimmick works two wings at the top of the wing by pulling at the bottom.
- Accessories: Hitoroddo (Shield), Beam Sword

Robot Spirits Side MS Gundam Avalanche Exia Action Figure

Robot Spirits Side MS Gundam Avalanche Exia Action Figure

Revoltech Evangelion Evolution EVA Unit 00 Custom Series No.104

- Evangelion Evolution the third one [Evangelion Unit (Revised).
- Covering the artificial joint exposure throughout the joint structures while Incorporating a newly developed, both able to convince the stylish look of the past than Eva.
- Put the weight and feel well, can take the pose of the waist and sat down at one point put in force the Just moving Yamaguchi.
- This series comes with a gadget to reproduce the confrontation scene in the play every time.
- This time [New Movie: Fracture] in order to recreate that scene's most impressive, very large size and the height [N2 large missile], and the private part attached to the luxury of a large volume limbs wrapped in a bandage.
- AT Field, battle of power will be connected to reproduce parts of the 10 apostles.
- So of course with the normal limb, the replacement can enjoy two types of styles and repair during normal times.
- Grab, hold, keep, and runs with 12 species included a variety of acting hand exchange. Confronted with the Apostles Hold on, the leg parts are included yuan effect.
- Moving parts: 22 points
- All 16 locations of revolver used: 10mm diameter × 2,8 mm × 8,6 mm diameter diameter diameter × 4 × 2,4 mm
- Optional parts: a large missile N2 × 1, Unit Zero arm repair status × 2, Unit Repair Status forearm zero × 2, right thigh and repair status Unit Zero × 1, umbilical cable × 1, Part of the Apostles 10 × 1, AT field × 1, Optional hands × 12, Part yuan effects leg × 2, Display stand set transparent (revolver mm diameter 10 × 2)

Revoltech Getter 1 Renewal Ver. Series No.105 Action Figure

Revoltech Getter 1 Renewal Ver. Series No.105 Action Figure
- Unheard of! Can be rearranged freely movable with the mantle.
- Design completely redesigned the New Getter 1]
- Divided into four parts to Gettauingu cloak, it is possible to connect joints in the balance of the four parts of mercy.
- Waving in the direction you like, can also be folded in the shape of a circle Haoru.
- 8mm in both shoulders with a joint structure evolved greatly extend down around the shoulders.
- Composed of independent parts of the waist belt and follow the movement around the body.
- The elbow joint 6mm, adopt a joint cover only.
- ROBOTS and even when stretched silhouette bent.
- Ting Gettatomahoku comes with two hand weapons, two swords actions are possible.
- Pause for bending the fingers and wrist for holding Tomahawk comes with four optional hands.
- Gettabimu injection effects, explosion effects are reproduced, respectively, can be connected at a joint 6mm.
- You can produce a sense of realism in the play.
- All 17 locations where mobile
- Use of all 11 joints: 10mm × 6,8 mm joint joint joint × 2,6 mm × 2, Joint 4mm × 1
- Accessories: Cape movable recombination × 4, Gettatomahoku × 2, the beam effect × 1, Explosion effect × 1, optional hands × 4, display stand - part Masaru Nobu × 1, Effects-based × 1

MG Kamen Rider OOO Tatoba Combo Model Kit

Please Click : MG Kamen Rider OOO Tatoba Combo Model Kit
- MG FIGURE-RISE Tatoba Raidaozu mask finally appeared from the combo!
- Bending the arms and legs linked to elevated muscle movement, muscle gimmick works each blast.
- Users can Medajariba Medajariba comes with power, cells can be removed and put the medal.
- Users scan scanner scanner can reproduce the O O can be removed from the belt, you can reproduce the scene in the play.
- Recreate the left and right expandable Torakuro Torakuro deployment. MG can be reproduced in the play area poses unique mobile Figyuaraizu overwhelming.
- Reproduce Ozudoraibagimikku To reproduce the precise Ozudoraiba [Hawks] [tiger] [Grasshopper] Users can launch the core of Like the movie, Slater O] can be tilted from horizontal. Omedarunesuto that comes with the belt, can accommodate a medal.
- Can be reproduced by replacing the Battareggu Battareggu Tatobakikku achieve. Stand is included, The display can be floated in the air.
- Accessories: Medajariba, Battareggu medals core cell Medals, Stand

MG Gundam 00 Raiser + GN-0000 GNR-010 Model Kit

Please Click : MG Gundam 00 Raiser + GN-0000 GNR-010 Model Kit
- MG Raiser, go!
- As well as Daburuogandamu body, internal frame structure is adopted in some Raiser.
- LED light emitting unit gimmick, GN particle emission reproduce the condition (head, GN drive, grain storage tank) ※ This product has five locations where emission. This product comes with a single LED unit.
Optional LED to light up all four units is required.
- Block ... can open cockpit hatch.
- Raiser Binder binder opening gimmick ... reproduce.
- Add new weapons designed to come ... Mekanikkumorudo. Raizasodomodo reproducible.
- Accessories: GN Sword II × 2, GN shield, GN Sword III, GN beam saber, 1 / 100 pilot figure (standing sitting)

RG Aile Strike Gundam Model Kits 1:144

Please Click : RG Aile Strike Gundam Model Kit
- RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
- New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
- Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
- Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
- Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
- Bring out the real attraction [of multi-colored armor.
- Launch of Kira Yamato, sitting figures included.
- Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing sitting)

Revoltech Jehuty Series No.103 Action Figure

Please Click : Revoltech Jehuty Series No.103 Action Figure
- Large Hittoakushongemu [ZONE OF THE ENDERS ZOE] from leading aircraft appeared Jefuti.
- Equipped with 17 joints of the body to form a characteristic called Obitarufuremu.
- Part of the rear wing is equipped with a joint at the base, to be deployed in various directions.
- Replace the parts open beam can reproduce the form of bending the cockpit flight.
- Forming a radar in clear plastic ring in an important game, limpid 飾Remasu attached to the stand using the connection part. When searching for the enemy [ENEMY] view expressed in vivid orange fluorescence.
- Weapons Separated [Whisp] equipped with a back three groups.
- 4mm joint connection, so you can reproduce the suspension components attached to the ring radar.
- Energy Sword in his right arm [paddle] is in storage and can reproduce at replacement during deployment.
- Left arm can rotate energy shield.
- Stab, punch and pose for the manipulator (wrist replacement) included five species.
- You can use the shaft with the center of the palm, in the game [attack grip] can reproduce.
- Leg heel [landing gear] and expand the state to replace the parts can only be independent in the figure.
- All 25 locations where mobile
- Use of all 17 joints: 10mm × 1,8 mm joint joint joint × 6,6 mm × 3, Joint 4mm × 7
- Accessories: Bimuuingu × 2, paddle stowed × 1, when the paddle deployment × 1, Manipulator (wrist replacement) × 5, the radar ring × 1, beam effects × 1, Landing gear (stand leg) × 2, when extending the arm for the 8mm double-joint × 2, Parts & Display Stand Masaru Nobu × 1, × 1 ring holding part Radar

Saint Seiya Cloth Myth Black Phoenix Action Figure

Please Click : Saint Seiya Cloth Myth Black Phoenix Action Figure

Hot toys IRON-MAN MARK II (A.U.Ver.) Ltd Ed Action Figure

Please Click : Hot toys IRON-MAN MARK II (A.U.Ver.) Ltd Ed Action Figure
The Iron Man wave is never stopped. Hot Toys is again proud to present the collectible figurine from the Iron Man 2 movie - the 1/6th scale Mark II (Armor Unleashed Version) Limited Edition Collectible Figurine. The movie-accurate Mark II collectible is highly detailed and deployed, specially crafted based on the image of Don Cheadle as Mark II in the movie, highlighting the authentic head sculpt, as well as the detachable chest, biceps, thighs armors and LED-lighted interchangeable boots with internal exoskeleton details.
The 1/6th scale Mark II (Armor Unleashed Version) Limited Edition Collectible Figurine specially features:
- Authentic and detailed fully realized likeness of Mark II with part of the armors unleashed in the movie Iron Man 2
- Head sculpt with authentic likeness of Don Cheadle with helmet as Mark II in the movie
- Approximately 30 cm tall
- Over 36 points of articulations
- Special features on armor:
- Metallic silver-colored painting on armor - One (1) helmet with LED-lighted eyes (white light, battery operated)
- One (1) opened helmet
- LED-lighted micro ARC reactor on chest (white light, battery operated)
- One (1) detachable chest armor with internal exoskeleton details
- One (1) pair of detachable biceps armor with internal exoskeleton details
- One (1) pair of detachable thighs armor with internal exoskeleton details
- One (1) left arm missile launcher
- One (1) right wrist gauntlet (as shield)
- Two (2) pairs of interchangeable palms including:
- One (1) pair with improved articulations, movable fingers and light-up repulsors (white light, battery operated)
- One (1) pair of forceful fists
- Fully deployed air flaps at back of the armor with built-in metal flaps
- AirBrake deployment system on left and right legs
- One (1) pair of LED-lighted interchangeable boots with internal exoskeleton details and leg support inside (white light, battery operated)
Accessories:
- Figure stand with Mark II nameplate and movie logo
- One (1) more additional square-shaped figure stand with LED light-up function (white light, battery operated)

Hot toys Captain Jack Sparrow Collectible Action Figure

Please Click : Hot toys Captain Jack Sparrow Collectible Action Figure
The highly anticipated 3D adventure fantasy Pirates of the Caribbean: On Stranger Tides movie presented by Walt Disney Pictures will be globally launched in May this year.

To keep in line with the movie launch, Hot Toys is proud to present the 1/6th scale Captain Jack Sparrow from the Pirates of the Caribbean: On Stranger Tides movie from the DX series, highlighting the highly detailed head sculpt with two interchangeable faces with different gestures, sophisticated costume and the movie-accurate rudder as accessory.

The 1/6th scale Captain Jack Sparrow Collectible Figure specially features: - Authentic and detailed fully realized likeness of Johnny Depp as Captain Jack Sparrow in the Pirates of the Caribbean: On Stranger Tides movie
- Approximately 30 cm tall
- TrueType body with over 30 points of articulation
- Highly detailed hair sculpted piece by piece with accessories and red hair band
- Two (2) interchangeable faces with different gestures with real-like beard and plaits on chin
- Parallel Eyeball Rolling System (PERS) patented by Hot Toys Limited for both faces
- Nine (9) pieces of interchangeable palms with rings and glove on right side including:
- One (1) pair of relaxed palms
- One (1) pair of palms for holding flintlock pistol
- One (1) right palm for holding saber
- One (1) pair of palms for holding rudder or telescope
- One (1) pair of palms showing his iconic gesture
- Each piece of head sculpt is specially hand-painted

Costume:
- One (1) leather-like detachable brown-colored hat
- One (1) piece of cream-colored long-sleeved shirt
- One (1) blue- and brown-colored patterned vest
- One (1) dark brown long jacket
- One (1) pair of dark brown pants
- One (1) dark brown and (1) light brown leather-like belt with buckle
- One (1) dark brown leather-like patterned shoulder band with saber sheath
- One (1) pair of brown boots

Weapons:
- Two (2) flintlock pistols
- One (1) saber
Accessories:
- One (1) left lace wrist band and one (1) right wrist band
- One (1) scarf
- One (1) piece of feather on waist
- One (1) compass
- One (1) small telescope
- One (1) head sculpt of his mother
- One (1) duck’s foot sculpture
- One (1) movie-accurate rudder with base and movie nameplate
- Figure stand with Captain Jack Sparrow nameplate and the movie logo

SCI-FI Revoltech Series No.025 Jack Sparrow Action Figure

Please Click : SCI-FI Revoltech Series No.025 Jack Sparrow Action Figure
- Captain Jack Sparrow as it is reproduced exactly like that!
- Pirate flag flapping in the wind ornaments diorama base, directing the world of maritime New Adventure!
- Disneyland attractions [Pirates of the Caribbean] and the motif, active movie set in a quirky sea pirates [Pirates of the Caribbean], your love of freedom Featuring Captain Jack Sparrow.
- Some parts of the hair coat and shirt with a soft material to use, can turn a natural pose without hindering the free movement of the neck and waist.
- Includes a large decorative stand the image of a sail-like dioramas, in conjunction with Jack Body Work recreate the world of every background can decorate.
- Which will come with guns and swords pirate hats and the hands of a removable sword from the sheath can be inserted and removed.
- Right hand grip is attached can have both guns and swords as an optional hands, also worked with the production of the play like a comical pose.
- Design executive Mr. Takeya Takayuki. Jack Sparrow sails the face of one and of course ornaments and decorations Flag wrinkles and reproduces every detail.
- Moving parts: all 16 points
- 12 No. of joints (10mm × 2,8 mm joint joint joint × 6,8 mm double × 1, Joint 6mm × 3)
- Includes: one ornament / flagged × 1, pirate hats × 1, sword × 1, gun × 1, optional hand × 1, × 1 nameplates

Robot Spirits Side MS V2 Gundam Action Figure

Please Click : Robot Spirits Side MS V2 Gundam Action Figure

Gundam UCHG E.F.S.F. Multidiscipline Light FF-X7 Core Figure M.K

Please Click : Gundam UCHG E.F.S.F. Multidiscipline Light FF-X7 Core Figure Model Kit 1:35

MG Gundam XXXG-01S Shenlong Gundam EW Ver. Model Kit

Please Click : MG Gundam XXXG-01S Shenlong Gundam EW Ver. Model Kit
- The 3rd volume of the EW version is Shenlong Gundam!
- The EW ver. Dragon-Hang has been reproduced. The new design of Dragon-Hang has been reproduced, with 5 points of articulation allowing for the opening of the "Fang" gimmick to be reproduced.
- Uses the XXX-G Frame that had been developed during the film. Able to sustain balance even when taking bold poses, by the double mobility of the ankle.
- Large effect parts included for the Beam Trident.
- Includes the new design shield with increased details.
- Marking work designed by Hajime Katoki.

Macross YF-29 Durandal Valkyrie Fighter Mode Alto Custom M.K

Please Click : Macross YF-29 Durandal Valkyrie Fighter Mode Alto Custom M.K
- New Line appears Makurosupuramoderushirizu! 1 / 100 scale display model fighter mode!
- The first one appeared on board the new hero Alto Movie Mon 2 YF-29 solidifies, the fastest!
- 1 / 100 scale while a / 72 just like accurate reproduction molded.
- Crispy divided to display model!
- Set color reproduction and color Makingushiru molding.
- Includes base for display.
- It appeared in the play comes the new Ganpoddo.
- Reproduced with clear plastic canopy.
- Accessories: New Ganpoddo, Stand

Hot toys Odin Limited Edition Collectible Figurine Action Figure

Please Click : Hot toys Odin Limited Edition Collectible Figurine Action Figure
Following the launch of the Thor Limited Edition Collectible Figurine, Hot Toys is proud to present the collectible figure of another character from the Marvel Studios - the 1/6th scale Odin Limited Edition Collectible Figurine from the upcoming Thor movie. The movie-accurate collectible is specially crafted based on the image of Anthony Hopkins as Odin in the movie, highlighting the newly developed head sculpt, highly detailed costume, accessories and weapon.

The 1/6th scale Odin Limited Edition Collectible Figurine specially features:
- Authentic and detailed fully realized likeness of Anthony Hopkins as Odin in the Thor movie
- Approximately 30 cm tall
- Muscular body with over 30 points of articulations
- Two (2) styles of hair sculpture, including one (1) for normal occasion and one (1) for wearing helmet
- Movie-accurate facial expression with detailed wrinkles, skin texture and beard
- Right eye with undetachable eye mask
- Eight (8) pieces of interchangeable palms including:
- One (1) pair of fists
- One (1) pair for holding spear
- One (1) piece of left palm with pointing finger
- Three (3) pieces of relaxed palms including two (2) left palms with different gestures and one (1) right palm
- Each piece of head sculpt is specially hand-painted

Costume:
- One (1) undetachable red cape
- One (1) brown upper long-sleeved outfit with stripes and leather-like details on arms
- One (1) pair of brown pants with stripes
- One (1) copper-colored upper body armor with silver-colored circle plates on the front part
- One (1) pair of copper-colored forearm armors
- One (1) pair of dark brown boots with brown- and silver-colored stripes
Weapon:
- One (1) champagne-colored electroplated movie-accurate Gungnir ("The Spear of Heaven")

Accessories:
- One (1) copper-colored movie-accurate helmet
- Figure stand with Odin nameplate and the movie logo

S.H.Figuarts Kamen Rider OOO Tatoba Combo Action Figure

Please Click : S.H.Figuarts Kamen Rider OOO Tatoba Combo Action Figure
- SH Raidaozu Figyuatsu masks [Tatobakonbo] appeared!
- Are used to clear parts Takaai.
- Come and Osukyana Medajariba.
- Torakuro form of attack can be reproduced by replacing.
- First comes the Ankh as a benefit! First and only minutes.
- SH Figuarts, click the character represented by the pursuit of the moving human form] the theme of technology, action figure from Bandai (Arts) condensed series the new standard figure.

Tamiya Yamaha YZR-M1 09 Fiat Yamaha Team Estoril Ed Model Kit

Please Click : Tamiya Yamaha YZR-M1 09 Fiat Yamaha Team Estoril Ed Model Kit
- Portugal 2009 GP of the year and only played in white and silver color YZR-M1 special reproduction. 800cc 4-cylinder engine and a parallel frame, front and rear suspension make enough Gotae.

- Mark slide chart made by the cult No.46, No.99 Two types of. A three-dimensional emblem stickers, rubber Tankupaddoshito specification also included Lorenzo.

Gundam HG Sinanju Titanium Finish Model Kit 1:144

Please Click : Gundam HG Sinanju Titanium Finish Model Kit 1:144

Saint Seiya Cloth Myth OCE Ltd Ver.Andromeda Shun Action Figure

Please Click : Saint Seiya Cloth Myth OCE Ltd Ver.Andromeda Shun Action Figure

DX Gundam METAL BUILD 00 Gundam Seven Swords Action Figure

Please Click: DX Gundam METAL BUILD 00 Gundam Seven Swords Action Figure
- The amount of information dense, mature lust alloy material - Its appeal, the product down to pursue texture reproduction [METAL BUILD] is.

- Seven Swords available from Daburuogandamu Daburuogandamu retrofit.
- Includes only Dipurei base.
- Height approx 180mm to pursue the reality of the robot is expressed as a finished product, marking a new design details and mechanics.
- The exterior is a rigid ABS plastic used. Moving parts have an excellent wear resistance POM, equipped with hand parts for the maintenance of soft flexible PVC can use both, both appearance and functionality.
- Other materials and ankle joints, die-casting is adopted. Produce a sense of texture and weight.
- Robot action figures designed by the accumulation of technology, provides a wide range of motion. Can reproduce a variety of poses.

Hot toys Jill Valentine (Battle Suit Version) Action Figure

New Arrival !!

Please Click : Hot toys Jill Valentine (Battle Suit Version) Action Figure
Hot Toys is proud to present the 1/6th scale Jill Valentine (Battle Suit Version) Collectible Figure from the Biohazard 5 video game series. The real-like collectible is specially crafted based on the image of Jill Valentine in her Battle Suit Version in the video game, highlighting the newly developed head sculpt, highly detailed battle suit and weapons.

The 1/6th scale Jill Valentine (Battle Suit Version) Collectible Figure specially features:
- Authentic and detailed fully realized likeness of Jill Valentine in the video game Biohazard 5 in her Battle Suit Version
- Approximately 28 cm tall
- TrueType body with over 30 points of articulations
- Real-like hair sculpture with ponytail
- Two (2) pieces of interchangeable gloved palms including:
- One (1) pair of relaxed palms
- One (1) pair for holding guns
- Each piece of head sculpt is specially hand-painted Costume:
- One (1) set of one-piece purple-blue color mixed with grey color patterned battle suit with straps in hip area for holding machine guns and high-heel platform boots
Weapons:
- Handgun
- Two (2) short machine guns
- Long machine gun
- Sniper
- Aid spray
- Two (2) grenades
- Two (2) ammo packs

Accessories:
- Magnetic administration device to be put around the heart area
- Figure stand with Jill Valentine (Battle Suit Version) nameplate and video game logo

Hot toys IRON MAN Mark V Ltd Ed Collectible Action Figure

New Arrival !!

Please Click : Hot toys IRON MAN Mark V Ltd Ed Collectible Action Figure
Hot Toys is proud to present the 1/6th scale Mark V Limited Edition Collectible Figurine from the Iron Man 2 movie. The movie-accurate Mark V collectible is highly detailed, highlighting the light-up function, detailed armor, additional battle damaged parts, suitcase and light-up figure stand.
The 1/6th scale Mark V Limited Edition Collectible Figurine specially features:
- Authentic and detailed fully realized likeness as Mark V in the movie Iron Man 2
- Approximately 30 cm tall
- Over 36 points of articulations
- LED-lighted eyes and Micro ARC reactor on chest (white light, battery operated)
- LED-lighted left and right arms (white light, battery operated)
- One (1) additional interchangeable battle damaged left arm
- One (1) additional interchangeable battle damaged chest armor
- Six (6) pieces of interchangeable palms including:
- One (1) pair of palms with movable fingers, improved articulations and light-up repulsors (white light, battery operated)
- One (1) pair of fists
- One (1) piece of battle damaged left open palm with light-up repulsor (white light, battery operated)
- One (1) piece of battle damaged left relaxed palm
- Metallic red and silvery-grey colored painting on armor

Accessories:
- One (1) suitcase
- One (1) figure stand with Mark V nameplate and the movie logo
- One (1) additional square-shaped figure stand with LED light-up function (white light, battery operated)

**Battery included for collectible figure, button cells (a total of 12 pieces) are required
**Battery not included for figure stand, 3A batteries (3 pieces) are required

Gundam HG RGM-79N GM Custom Model Kit 1:144

New Arrival !!

Please Click :Gundam HG RGM-79N GM Custom Model Kit
- Ace popular aircraft type gym, HGUC series of three-dimensional!
- Powered gym, gym eye featuring a custom three-body system in 0083 following the break gym gym!
- The completely new exterior parts. Unique slim-line reproduction.
- Jim breaks joints conform to specifications, ensuring a wide range of movement.
- Includes six hand parts.
- Accessories: beam saber × 2, shield, rifle Gym

Gundam HG Forever Gundam Model Kit 1:144

New Arrival !!

Please Click :Gundam HG Forever Gundam Model Kit 1:144
- Manipulate the strongest Gundam Foebagandamu Ganpuramaisuta Schauer, He appeared ahead!
- Inviting Mr. Ookawara Kunio mechanical design, reproduction new Furuamaforumu nostalgic!
- HG RX78-2 G30th equipped Gundam Full Armor! Add G30th exterior parts. Some removable armor.
- Canon's flexible movable rear. Tip is removable.
- Fully armed G30th similar.
- Can be a variety of poses while Furuamaforumu!

- Accessories: beam rifle, beam saber, shield, hammer Gundam Hyper bazooka, funnel × 4

MG Gundam RGZ-95C ReZEL Commander Model Kit 1:100

New Arrival !!

Please Click :MG Gundam RGZ-95C ReZEL Commander Model Kit 1:100
- Episode2 Lisl's also active in aircraft commander in the MG lineup! - The difference between aircraft equipped with General ... wing binders, with mega beam launcher, Change the color of the color forming part of the aircraft commander.
- Supplier of linkage with the deformation mechanism to improve the proportions!
- Sabre, of arms and grenade built to reproduce the mechanism of armed!
- Opening and closing the hatch. Reproduction and internal Mekamorudo, MG dent made to provide details of the brand we all expect.

Revoltech Getter Ark Series No.099 Action Figure

New Arrival !!

Please Click :Revoltech Getter Ark Series No.099 Action Figure
- Finally the 99th product! By the power of Yamaguchi mobility and the Revolver Joints, the ultimate Getter has made appearance!

- Using 23 revolver joints on the ’Getter Arc’, work left by Dr. Saotome.
- You will be able to enjoy creating dynamic, violent action poses!
- The Getter Wings equipped to the back can be individually moved on the unit.
- You can line them like a cape, or spread them in an arc, enabling you to add motion or effect to your pose.
- The base of the wing has been equipped with the W-Joint. By turning the unit to spread the wings in an upward arc, you can reproduce the finishing move "Thunder Bomber".
- Also includes the Double Tomahawk. You can make it equipped on both hands, or attach the grips by using the grip connection parts to equip it as twin-blade, enabling you to match the situation!
- Comes with a face parts with wide-open mouth, and 6 option hands.
- Using the option hand with claws, you can reproduce the heroic action as it tears through the opposing machines.
- As the elbow and shin plates can be moved, so it won’t get in the way of your poses.
- Includes display stand and effect base. Compatible with a variety of battle scenes.
- Poseable areas: Total 29 places
- No. of joints used: Total23 (10mm joint x7, 8mm joint x4, 6mm W-Joint x 1, 4mm joint x11)
- Accessories: Internal Parts of Enemy Machine effect part x2, Option hands x6, Option Head x1, Getter Tomahawk x2, Getter Tomahawk Grip Connection Parts x1, Display Stand + Extension parts x1, Effect Base x1, Revo-Chip (10Points) x1, Revo-Container x4